Surfaces That Match Your Space
Custom Concrete Coatings in Saint George and Provo, UT, for Garages, Patios, and Commercial Spaces Combining Style and Durability
Homeowners in Saint George and Ivins often want a garage or patio finish that suits a newer or remodeled home rather than a generic gray slab, while local businesses look for floors that reflect branding or design intent. Custom concrete coatings allow solid colors, flake blends and metallic finishes to be applied over the same commercial-grade epoxy base and polyaspartic topcoat system used on standard jobs. Rhino Concrete Coatings builds each custom floor on diamond-ground concrete so the decorative layer bonds directly to open pores in the slab.
Color and finish are selected first, then the concrete is diamond ground to bare, clean substrate with open pore structure so contamination and old sealers are removed. The chosen system is applied in layers: base coat, decorative layer—whether solid pigment, flake broadcast or metallic flood coat—and a clear polyaspartic topcoat that locks the design in place and provides abrasion resistance. Branding details or specific color matches are discussed during the estimate so the system can be built to the design rather than adjusted after the fact.
Request a detailed estimate to review color options and finish styles available for your floor type.
Every custom coating starts with the same diamond grinding process used on commercial floors, since decorative finishes still depend on a clean, profiled surface for adhesion. The base epoxy layer is applied first to seal the slab and provide a stable foundation, then the decorative element is added—flake is broadcast into wet epoxy and later scraped to remove loose chips, while metallic pigment is flood-coated in a single heavy pass and allowed to swirl as it cures.
Once the decorative layer has cured, you'll notice the color is locked under a clear topcoat that resists scuffing, UV fading and chemical staining, so the floor maintains its appearance under daily use. The topcoat is applied at a controlled spread rate to avoid thinning the protective layer while still allowing the color or metallic pattern underneath to show through clearly.
Custom work takes the same turnaround time as standard coatings, though metallic finishes require an additional vapor barrier step before the pigment layer goes down. The finish is fully cured and ready for normal traffic within 24 to 48 hours depending on temperature and system type.
Questions About Design and Durability
Homeowners and business owners across Saint George and Hurricane want floors that look intentional without sacrificing the bond strength and wear resistance that make concrete coatings practical in the first place.
How is a flake finish different from a solid color coating?
Flake is broadcast into the wet base coat as small colored chips that create texture and visual variety, then the surface is scraped to remove loose flake and topcoated, while a solid color is a single uniform pigment mixed into the base coat with no texture variation.
What does diamond grinding remove before a custom coating is applied?
Grinding removes sealers, curing compounds, oil stains, old coatings and the top layer of carbonated or contaminated concrete, leaving bare substrate with open pores so the new system bonds mechanically rather than sitting on top of a weak layer.
Why does a metallic finish require a moisture vapor barrier?
Metallic pigment is applied in a thick flood coat that can trap moisture trying to escape through the slab, so a vapor barrier is installed first to prevent blistering or delamination as the slab breathes.
What should you bring to the estimate if you want a specific color or design?
Photos of the space, examples of finishes you prefer, branding colors if it's a commercial job, and details about how the floor will be used help match the system to the design and the traffic level.
What stays visible after the topcoat cures?
The color, flake pattern or metallic swirl remains fully visible under the clear polyaspartic topcoat, which is formulated to stay transparent and resist yellowing under UV exposure or chemical contact.
Rhino Concrete Coatings also applies custom concrete coatings in Hurricane, Washington, Ivins, Santa Clara and Mesquite. Free estimates are provided on every project, and the standard pricing system keeps quality consistent across decorative and commercial-grade installations.
